FS33x Technical info Product Information

13-12-2013 FS3.2663 New potentiometer

20-08-2012 SERVICE MANUAL FS3xx

24-01-2012
New turntable rolls for the FS1xx and FS3xx machines.
The rolls can be mixed with the rolls FS4.1017 for FS4xx machines.

24-12-2011
OP2 – Parameter settings Inverter table: FS3.2186
OP2 – Parameter settings Inverter carriage: FS3.2188

22-11-2011
Special maintenance for carriage C2 / FS31x – FS33x

20-04-2011
Inverter settings. Parameters can be found in the ELS or
document Inverter settings page 9 / 10 / 11

17-01-2011
Complete list of ALL FS Stretcher inverters with Normalized “non programmed codes and “FS Programmed codes” for every type of Machine.
In this list you can also find the complete list of Parameters indicated per machine.

21-05-2010
For the parameter decriptions please read / study our technical training.
TRAINING TECHNICAL FS31x / FS33x
Parameter explanation OP1
Parameter explanation OP2

09-11-2006
Manual LG inverter

MAINTENANCE ADVISE!

One
If your client is pushing the machine to his limits in more than 70% of the labour time. (Speaking about weight on the turntable Ø1500mm 1.350kg and Ø1650mm 2.000kg) we advise to change to rolls FS4.0168 to rolls FS4.1017

Two
Check the fixing screws of the turntable. If the bolts with hardness 8.8 are inserted, we advise to change this to code N1.2183 (Hardness 10.9)

Photocell for black goods:
N5.2638 for black film with reflection.
N5.2651 for dark goods with low or no refelction.
Read more under spareparts N

For the parameter decriptions please read / study our technical training.
TRAINING TECHNICAL FS31x / FS33x

Improved INVERTER Parameter setting for the carriage FS33x
Normalized code N51.5427
Programmed code FS3.2188
H33 – 1,8 changed to 1,3
H34 – 0,5 changed to 0,8
For all deliveries FS3xx from the beginning of March 2009
(Problem description. Carriage stops and doesn’t continue the movement up. The pallet is only wrap half way)
– Pallet goods are normal; (Not black)
– Timer fotocell has not elapsed;

Dimensions FORK INSERTIONS FS3xx
Measurements for the two tubes, which enabling you to lift up the machine.

If you suffer problems with the friction of carriage one. For example if your client is using a very low quality film, than we advice to change the friction disk from code FS3.2034 (Standard) to code FS3.2303. Read more by downloading the document FRICTION DISK.