FROMM FS590 Series ROTATING ARM Stretch Wrapping Machines, with C6 pre stretch carriage with one motor.
Semi-automatic Stretch Wrapping Machines with multiple wrapping programs and various pre-stretch systems.
If you prefer easy to operate machines with the option of A simple operating panel or one with no less than 99 wrapping programs and multiple pre-systems, then you should certainly choose the FROMM FS5xx Stretch Wrapping Machines.
Again, extra emphasis was placed during the design stage on quality, safety and reliability. All these machines are designed to cope with a high workload. The use of carefully selected components keeps maintenance to a minimum.
FS590 with C6 – 1-Motor driven pre-stretch unit (250%)
Pre-stretch by means of a 1-Motor driven pre-stretch unit, enabling a controlled film feed. The film supply speed can be adjusted from the control panel.
(Simple OP1 or sophisticated OP2 control panel)
In general FROMM advises to operate the FS590 and FS595 with POWER PRE Stretch systems in combination with OP2 control panel.
With this combination you achive maximum flexibility from the programming point of view in combination with the maximum savings of costs.
A brief list of the benefits
• pallet height 2.200 mm / 2.500mm / 2.800mm / 3.200mm
• wall mounting system
• floor mounting system with column
• low bottom wrap
• machine functions adjustable on the easy to operate control panel.
Standard technical specifications
- Machine code 32.3210.160
- Maximum pallet format 1.100 x 1.300 mm
- Maximum pallet weight “depending on floor capacity”
- OP2 Operating panel
- Maximum pallet height 2.200 mm
- Power supply 230V – 50/60 Hz
- wall mounting system
- carriage C6 with fixed ratio one motor pre-stretch system
- 1 automatic program