Standard equipment and functionalities:
- base frame 75mm and Turntable Ø1650mm (max load 2000Kg/pallet size 1000x1200mm);
- mast for max wrapping height of 2500mm;
- operating panels 6+1 programs with emergency stop and reset buttons (CE);
- film carriage with Electromagnetic brake;
- soft stat / soft stop by frequency controller;
- acustic signal at start of each wrapping cycle;
- wrapping speeds controlled by frequency contr.;
- film carriage fitted with fall and food safety protection;
- package detection by photocell or altimeter for manual (pre-set) max. heigh setting.
Control Panel
OP1 Control panel with 6 +1 free programmable programs;
OP2 Control panel with 99 +1 free programmable programs;
Standard Program
Cycle Up&Down; Single cycle Up or Down only; Cycle with Pre-set position of carriage at start and stop;
Cycle at pre-set height using altimeter, without photocell; Reinforcamente cycle with programmable num. wraps;
Stepping cyucle, moving the carriage in steps up and down; Manual wrapping, operated from the OP.
Operating Panel Functions
Turntable rotation speed setting 5-12rpm; Film carriage speed, independently Up&Down;
Top&Bottom wraps 1-10, independently; Photocell setting/sensing; Setting lock;
All other general functions and parameters.
Turntables
Turntable Ø1500mm – Ø1650mm – Ø1800mm – Ø2400mm – Horse shoe Ø1650mm – Horse shoe Ø1800mm;
Base plate (Ø1650mm) for Low profile (25mm), max load 1.000 x 1.200 mm
Maximum pallet format
800 x 1.200mm for Ø 1.500mm;
1.100 x 1.200mm for Ø 1.650mm;
1.250 x 1.250mm for Ø 1.800mm;
1.550 x 1.550mm for Ø 2.200mm;
1.675 x 1.675mm for Ø 2.400mm;
Masts and their respective Max.wrapping height
Mast for wrapping height < 2.500mm;
Mast for wrapping height < 2.700mm;
Mast for wrapping height < 3.000mm;
Mast for wrapping height < 3.300mm;
Mast for wrapping height < 3.700mm;
Film carriages
CA4 Carriage with Electromagnetic roll brake;
CA6 Carriage with one-motor pre-stretch and fixed gears (interchangeable) 150% – 200% – 250%. Film tension adjustable from control panel;
CA7 Carriage with two-motors pre-stretch (electronically adjustable pre-strech ratio from 120% to 350%);
Options
Ramps and Pit-options for all the bases;
Automatic film cutting device (for CA4 or CA6 or CA7 carriage only); Automatic slicing system;
Manual and automatic roping system:
Kit for Coreless machine type rolls and for film rolls with inside core Ø50mm;
Kit for wrapping doors, panels or windows;
Film Carriage for Net-wrapping (for CA4 carriage only);
Guide for wrapping supermarket trolleys;
Idle conveyor on turntable with automatic rollers braking device;
Top-press (round or square); Scale unit; Printer; Remote control; Stretch film weight consuption check (for CA6 or CA7 carriage only);
Film welding unit (automation);
…..
Related Files
Leaflet
FA Options for FS380 and FS500 series
Machine Layout
LAYOUT FS380A Ø1650xH.2500 +RAMP_REV_1